- Ac servo motor
- Ac servo motor-tachoge...
- Reversible motor
- PM synchronous motor
- BY stepper motor
- BF stepping motor
- BH stepping motor
- Gear motor
- Model YS.JB three phas...
- Speed control motor an...
- Braking motor and brak...
- Single phase reversibl...
- Handheld Centrifugal T...
- Fixed Centrifugal Tach...
- Locomotive Tachometer
- Fixed Magnetic Tachome...
- Marine Magnetic Tachom...
- Electric Tachometer
- Magnetic-electric Tach...
- Rotating Speed Recorde...
- Handheld Digital Tacho...
- Digital Gasoline Engin...
|
SZMZ-03
Magnetic speed transducer
Technical parameters
Working frequency: l0Hz ~ 1500Hz
Working voltage: 12V ~ 24V (DC)
Load resistance: ≥10KΩ
Measurement range: 0.9mm±0.5mm
Detection of the gear modulus :m≥1.5
materials for electrical steel (DT4)
Output signal: waveform: rectangular wave
amplitude: high level ≈working voltage,
low level ≤0.5V
Normal working condition:
Temperature: -20~+80℃
Relative humidity:≤85%
Atmospheric pressure: 86KPa ~ 106KPa
no corrosive or explosive gases.
Dimensions
Total length: 88mm (not including output wire)
External thread:M22×1