- Ac servo motor
- Ac servo motor-tachoge...
- Reversible motor
- PM synchronous motor
- BY stepper motor
- BF stepping motor
- BH stepping motor
- Gear motor
- Model YS.JB three phas...
- Speed control motor an...
- Braking motor and brak...
- Single phase reversibl...
- Handheld Centrifugal T...
- Fixed Centrifugal Tach...
- Locomotive Tachometer
- Fixed Magnetic Tachome...
- Marine Magnetic Tachom...
- Electric Tachometer
- Magnetic-electric Tach...
- Rotating Speed Recorde...
- Handheld Digital Tacho...
- Digital Gasoline Engin...
|
CZ-20A
Fixed Magnetic Tachometer
CZ-20A fixed magnetic tachometer is used for measuring the rotating speed of rotating shafts of various kinds of low-speed machinery and equipment.
Main Technical Parameters:
Operating conditions:ambient temperature of -20℃~50℃,relative humidity of less than 85%
Basic error:the basic error limit of the tachometer is ±1.5% of measurement upper limit at the temperature of 20℃±2℃.
Temperature influence:the indicating value change of the tachometer should not exceed the absolute value of basic error limit every time the temperature is changed by 10℃when the ambient temperature is changed within a specified range.
Range of oscillation:the pointer can swing slightly during operation of the tachometer, while the range of oscillation cannot exceed the absolute value of basic error limit.
Homodromous rotation: the pointer of the tachometer rotates clockwise in a single direction; the rotating shaft and the pointer rotate in the same direction.
Dust prevention: the tachometer is equipped with a sealing device which has the effect of dust prevention.