- Ac servo motor
- Ac servo motor-tachoge...
- Reversible motor
- PM synchronous motor
- BY stepper motor
- BF stepping motor
- BH stepping motor
- Gear motor
- Model YS.JB three phas...
- Speed control motor an...
- Braking motor and brak...
- Single phase reversibl...
- Handheld Centrifugal T...
- Fixed Centrifugal Tach...
- Locomotive Tachometer
- Fixed Magnetic Tachome...
- Marine Magnetic Tachom...
- Electric Tachometer
- Magnetic-electric Tach...
- Rotating Speed Recorde...
- Handheld Digital Tacho...
- Digital Gasoline Engin...
|
SZMJ-302
Rotating Speed Recorder
This instrument is used for measuring rotating speed in a far distance and recording and transcribing the speed to achieve the aim of two-point rotating speed alarm, with the effect similar to SZMT-102.
The instrument can measure low rotating speed when matched with SZMB-3 sensor, and measure high rotating speed when matched with SZMB-0or SZMB-1 sensor.
Main Technical Parameters
Operating conditions:the instrument can operate normally at the ambient temperature of 5℃~+40℃and the relative humidity of less than 85%.
Basic error:the basic indication error of the instrument should not exceed ±1% of measurement upper limit at the ambient temperature of 20℃±2℃and the relative humidity of less than 85%.
Temperature influence:the indicating value change of the instrument should not exceed the absolute value of basic error limit every time the temperature is changed by 10℃when the temperature is changed from 20℃±2℃to 5℃~+40℃.
Recording error:the recording error of the instrument is ±0.5% of indication error.
Additional Electric Connection
Spot capacity: 220V, 1A AC, or 30V, 0.5A DC; the setting range is 10%~90% of full scale.
Instrument power supply: 220V, 50Hz AC; the instrument can operate normally when the voltage change is +10-15% of rated value, and the frequency change is ±5% of rated value.
Consumption power: ≤12VA
Weight: about 3.7kg